Limited edition
Akaryū - Ring
通常価格
€54,95
単価
/
Go Back
ステップ 1
この画面に表示されているカードの画像に、銀行カードまたはクレジットカードを置いてください。画面下部の円を左右にスライドさせて黒い枠線を調整します。カードを枠で囲みながらも、枠線が見えるようにしてください。
次に、「次へ」をクリックしてください。
戻る
あなたに合ったリングを円周上に置いてください。スライダーを使用して円周を調整し、上に置いたリングの内側の縁と一致するようにします。内側が見えるようにしてください。
Aka (赤) stands for red, and Ryū (竜) means dragon. This piece is a visual ode to aesthetics, seamlessly blending the vibrant energy of 2000s manga culture with the enigmatic allure of dark fantasy.
Material: Stainless Steel
Stones: Red zirconias

Every order comes with a Kuurth's sphere and an owner's guide.
- The ring should fit you comfortably; it should be tight enough not to fall off but loose enough to slide over your knuckle.
- Measure the circumference of the finger where you are going to put the ring with a sewing meter, if you do not have a sewing meter you can cut a strip of paper, surround the finger with the strip and make a mark.
- Then measure that section of the paper with a ruler or tape measure, the measurement you get is the length.
- Measure the finger a couple of times to avoid mistakes.
OUR SIZE | DIAMETER | LENGTH |
XS | 16 MM - 0.629 INCH | 50 MM - 1.968 INCH |
S | 17.3 MM - 0.681 INCH | 54.34 MM - 2.139 INCH |
M | 18.5 MM - 0.728 INCH | 58 MM - 2.283 INCH |
L | 19.7 MM - 0.775 INCH | 61.8 MM - 2.433 INCH |
XL | 21 MM - 0.826 INCH | 66 MM - 2.598 INCH |
-
交換および返品は14日間
-
バルセロナデザイン
-
すべての出荷は完全に保険がかけられています